Sliding Glass Door Rollers on a SedanBridge

[Bob L]

Has anybody ever replace the rollers on the sliding glass door & where did you get the rollers and part # ( adjustment all the up and it sounds like its scraping on the tracks) I have a 2004 400 sedan bridge. Thanks Bob

 

[Nepenthe]

Have you tried lubricating the rollers with WD-40 (or similar)? I eliminated the same noise by squirting WD-40 through the openings on each end of the door. It is back to being as smooth as new.

 

[Bob L]

Well I fist cleaned the track and then put some zipper grease on the track that's all I had at the time. I will try wd-40 but as I close the door the gap between the door and the frame is not = the top seems to be closer then the bottom telling me that the front Rollers should be lifted but they are all the way up and the back are all the way up also

 

[bahamabreisus]

Try these people http://www.searay-parts.com/Default.asp

 

[Gofirstclass]

I had a local glass company come out and replace the rollers on my door. It took them about 2-3 hours (2 guys) and cost me a total of $130.

It's not worth the hassle for me to do it myself when I can get it done for that.