Simple Vacuflush Question ???

[Shady money]

I would like to know if there is a way to adjust the water level in the bowl ???? I want more water I have only about a cup in the bowl everything works fine.

 

[Stray Cat]

raise the pedal, it'll fill the bowl

 

[Shady money]

How is this done ?

 

[copb8tx]

You manually put your toe under the pedal and raise up. It's a two way valve and it'll add water to the bowl for that flush only.

 

[Shady money]

Thank You....
This is a great site.

 

[MonacoMike]

DITTO!!! Sadly, I was to late. Someone asked a question I could answer with confidence.:smt043

MM

 

[Four Suns]

geez... that whole "lift the pedal" thing is required if you don't want to leave skid marks in the bowl...

 

[Gofirstclass]

Also, when you are done holding the pedal down, don't ease it up, let it snap up. That makes sure the ball gets cleaned every time. That bit of info comes directly from Vacuflush.

 

[Stray Cat]

Just don't "head" out for a ride with the bowl half full to avoid the slosh factor when you cross a wake or other fun stuff.

 

[The Bill Collector]

geez... that whole "lift the pedal" thing is required if you don't want to leave skid marks in the
bowl...

that is why I place the preemptive strip of tissue in the bowl before I start......

 

[skibum]

Good info. I thought the skid marks were inevitable.