osd9
New Member
While trying to check my "check" valve in the sump this morining I notice a small leak. The barb coming out of the box has a hair line crack. I bought a whole new setup at Westmarine this afternoon ( they matched boatersworld price.....West was $130 and BW was $89...that's a big difference for the same part). Anyway, I didn't feel like re-wiring and re-caulking, so I used the pump and float from the original box. I'll keep the new float and pump as a spare.
I used the new check valve as well. The old valve was definitely my original problem. The rubber vanes were stuck open and would allow enough water to re-enter the box and cause the pump to constantly cycle.
These check valves are very similar to duck bill valves in the vacuuflush. Another spare part to add to the "spares" box. By the way....anyone know where to buy JUST the check valve... :smt017
I used the new check valve as well. The old valve was definitely my original problem. The rubber vanes were stuck open and would allow enough water to re-enter the box and cause the pump to constantly cycle.
These check valves are very similar to duck bill valves in the vacuuflush. Another spare part to add to the "spares" box. By the way....anyone know where to buy JUST the check valve... :smt017