jassink
New Member
- Apr 14, 2016
- 1
- Boat Info
- 1986 Sundancer 270
- Engines
- Twin 230 Mercruiser w/ Alpha 1 Gen 1 drives
Purchased a 86 270da last summer and had a survey done before purchase.
The PO had installed a second shore power inlet on the starboard side. The inspection revealed that both inlets were directly wired to the shore power panel.
Last summer I disconnected one of the inlets to avoid any electrical issues or risk of shock from the unused inlet. The surveyor recommended installing a selector switch so that only one inlet could be used at a time and the other would remain "dead". Has anyone installed such a switch. Blue Sea makes a rotary three position switch, wondering if anyone has any input on this switch or install.
Sent from my iPhone using Tapatalk
The PO had installed a second shore power inlet on the starboard side. The inspection revealed that both inlets were directly wired to the shore power panel.
Last summer I disconnected one of the inlets to avoid any electrical issues or risk of shock from the unused inlet. The surveyor recommended installing a selector switch so that only one inlet could be used at a time and the other would remain "dead". Has anyone installed such a switch. Blue Sea makes a rotary three position switch, wondering if anyone has any input on this switch or install.
Sent from my iPhone using Tapatalk