Seat Foams

[Steve Craig]

Hi,
Anyone know who the OEM manufacturer was for Sea Ray captains chairs in the 2007 model year ?
The foam in a bolster is in bad shape & I'll need to find a replacement piece over the Winter.

Thank You all.

 

[KevinC]

It probably will depend on model. Call/email Sea Ray support and they should be able to give you that info. I think Crane Interior did many of the seats.

-Kevin

 

[Espos4]

Hi,
Anyone know who the OEM manufacturer was for Sea Ray captains chairs in the 2007 model year ?
The foam in a bolster is in bad shape & I'll need to find a replacement piece over the Winter.

Thank You all.

I know the piece that you are talking about.
Both of mine were sagging. I was not able to find a pre molded replacement last year.

I did fix them myself and they are holding up well.

Remove the vinyl and save all of the pieces of foam. I then sprayed all the torn pieces with 3M foam adhesive and literally glued them all back together.

I added some 1” foam where needed to firm it up.

Reinstall the vinyl (or make new ones) and be sure to use stainless steel staples.