Searay 2007 320

Discussion in 'General Maintenance/Repair Questions' started by James Glenbowski, Dec 7, 2021.

  1. James Glenbowski

    James Glenbowski New Member

    8
    May 29, 2021
    320 sundancer 2007 raymarine C80
    350 mercruiser mpi with v drives
    How can I find out the length of my straight shafts I need to change one an the cutlassbearing shafts is 1-1/2 thick an where to get in New Jersey
     
  2. stg099

    stg099 Active Member

    395
    Jun 30, 2013
    Chicago
    2013 370 Sundancer
    8.2L V-Drives
    Not entirely sure what you're asking here. To determine your shaft size, I'd download your parts manual from the Sea Ray Website and confirm the part number. If the length isn't noted in the manual, I'd reach out to Sea Ray support and see if you can confirm, otherwise a local sea ray dealer should be able to look up the specs as well as order the shaft if you need a replacement.
     
    James Glenbowski likes this.
  3. Stee6043

    Stee6043 Well-Known Member GOLD Sponsor

    Jun 1, 2015
    West Michigan
    1997 Sundancer 400
    7.4L Gassers
    Your boat might/should be old enough now that the prop shaft is going to be custom made either way. Your marina should have a source for custom prop shaft work. It's pretty common...
     
    James Glenbowski likes this.
  4. James Glenbowski

    James Glenbowski New Member

    8
    May 29, 2021
    320 sundancer 2007 raymarine C80
    350 mercruiser mpi with v drives
     
  5. James Glenbowski

    James Glenbowski New Member

    8
    May 29, 2021
    320 sundancer 2007 raymarine C80
    350 mercruiser mpi with v drives
    Thank you my friend
     
  6. James Glenbowski

    James Glenbowski New Member

    8
    May 29, 2021
    320 sundancer 2007 raymarine C80
    350 mercruiser mpi with v drives
     
  7. James Glenbowski

    James Glenbowski New Member

    8
    May 29, 2021
    320 sundancer 2007 raymarine C80
    350 mercruiser mpi with v drives
    Thanks
     

Share This Page

Show Sidebar