Sea-fire help

[Bob Holser]

Good morning,

A couple of things I need help with.
1.) I have a 2001 Searay 420AC and I can not for the life of me find the engine shut down control box. Any suggestions?
2.) I have the old style switch control on my helm that needs to be replaced (attached picures). Any idea where I can get on or what new model is compatable?
3.) my blowerrs are no working. no power to the switch in the panel in the cabin or at the helm. I assume it is and issue with my sea-fire system as the Sea-Fire switch at the helm looks to be bad. Any Ideas?

 

[ttmott]

The Sea-Fire module is probably inside of the main breaker panel as is the blower control module.
The blower control module is fed through two power sources and controlled by a switch.
The lamp on the switch if flashing means either the blower control module has failed, the control power has failed or one of the blowers has failed.
If the Sea-Fire module has failed or the suppression bottle low on pressure the engines will not start, the generator will not start as well as the blowers will not operate unless that switch in your picture is set to "bypass". The red light on means the bottle has discharged or is low on pressure.