whataride
New Member
I have a 2000 410DA. I can't pull the TV out do to a trim piece. Do I have to remove the refrigerator to get to the screws??????????? Please help Thank You Bruce:huh:
Salon tv removal
- Thread starter whataride
- Start date
Skuza
Well-Known Member
Do you have a 2000 or 2001 and is it a 410 or 400? Should be similar regardless. I removed ours and you have to remove the vinyl edging that sits on top of the fridge cabinet. This is done by VERY CAREFULLY prying between the gold trim and the wood veneer. The prying action can distort/bend the gold trim so be carful. The piece is held on by plastic "christmas trees" that hold VERY well.
After that I believe there are two phillips screws that secure a baseplate to the cabinet. The rear of this plate just slid into a channel made out of wood to lock it in. The tv is mounted to this plate and after the two screws are removed should just slide out. The screws I think were along the sides in that little gap. Now I've heard some that were screwed from the bottom in which you would have to remove the fridge to access.
I removed our tv and turned that space into a big storage cabinet. Lots of room back there!
After that I believe there are two phillips screws that secure a baseplate to the cabinet. The rear of this plate just slid into a channel made out of wood to lock it in. The tv is mounted to this plate and after the two screws are removed should just slide out. The screws I think were along the sides in that little gap. Now I've heard some that were screwed from the bottom in which you would have to remove the fridge to access.
I removed our tv and turned that space into a big storage cabinet. Lots of room back there!
