Running wires on a 44 sedan bridge

upload_2019-5-22_14-3-54.jpeg
 

Attachments

  • 2F230247-FAB1-4B92-A478-F26C6EBA6243.jpeg
    2F230247-FAB1-4B92-A478-F26C6EBA6243.jpeg
    116.1 KB · Views: 83
On my 480 all wiring goes down the starboard side. You can then bring into the cabin. Don't know if that helps.
 
Pull your TV down and remove the black board it is attached to. There are 4-screws...one in each corner. In there you should see how the wires leave that area. They may go up or they may go down into the bilge and over to the port side and up. There is a big bundle of wires that run across the bulkhead under the sliding door. Not sure if they go up or down from the entertainment center.

Bennett
 
As stated above if you remove the tv there is a large bundle that goes up to the bridge. You then remove the storage unit on the bridge to get to the access panel on the starboard side. The wire bundle turns towards the bow there.
 
Matt, whenever you pull wires, pull a length of parachute cord with it, and make sure it's several feet longer than the wiring. That way if you ever pull wires in that area again you'll have the cord there already.
 
Matt, whenever you pull wires, pull a length of parachute cord with it, and make sure it's several feet longer than the wiring. That way if you ever pull wires in that area again you'll have the cord there already.

Excellent advice. I have strings everywhere!

Bennett
 

Forum statistics

Threads
113,186
Messages
1,428,188
Members
61,098
Latest member
Klawson83
Back
Top