xravenx
Member
Interesting stuff Henry.......thanks. I guess I will just see exactly what these monitors can do. Ummm, as far as the budget, it is depleted after this little upgrade......LOL
John
John
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Couple words of advice as I went through this as well but since I had new carbs I purchased new long blocks, FWC, etc. The newer engines have roller cams, and if you remain with the current log-style exhaust of the previous 7.4s you run the risk of sucking water up due to the static line being too low (I went with the 6 inch extensions). Also, I don't know what the power rating is on those engines, but you should have 1.25" shafts. Maybe someone else knows what they are rated for. You also might need to visit your prop selection to prevent the engines from either over/under working. I am not claiming to be the ultimate authority, but these were gotchas that I was warned about in considering my repower options.
My 380DA does have 1.5" shafts.Don