boatrboy
Well-Known Member
I noticed on one motor a drop of antifreeze in the water pump weep hole so while I have the mufflers out I’m going to replace them.
For those who have changed these, do I have to remove the crossover tube or can I lift the water pump into the special seal on the bottom of the crossover tube while it’s still on the block?
Any other words of wisdom while doing this?
Thanks in advance.
For those who have changed these, do I have to remove the crossover tube or can I lift the water pump into the special seal on the bottom of the crossover tube while it’s still on the block?
Any other words of wisdom while doing this?
Thanks in advance.