Replacement Prop 99' 310DA Vdrive

[Caveman22]

I have a port prop that had 2 of 3 blades damaged. They are missing the tips off both. I want to have a new prop on hand so that when I pull the boat I can swap it out while is still in the slings. I'm sure they are stock props, but I can't find a part number, diameter, or pitch info. on them. Any ideas? Here are some pics when the survey was done.

 

[StefanFL]

Depending on the engine 310da vdrive had 16x15 and 16x17.

 

[Caveman22]

Depending on the engine 310da vdrive had 16x15 and 16x17.

It has 350 horizons

 

[StefanFL]

That's 300hp, so original equiped was 16x17.

I believe it would be hard to find exactly same model of prop, and even then other prop despite looking good is probably off the original specs, so I would replace both once boat is out of the water.

 

[Caveman22]

That's 300hp, so original equiped was 16x17.

I believe it would be hard to find exactly same model of prop, and even then other prop despite looking good is probably off the original specs, so I would replace both once boat is out of the water.

Thanks. I was planning on doing both also. Any suggestion as to a specific brand or website to order replacements?

 

[StefanFL]

I don't have much experience with v Drive props, but I'm sure folks with same/similar boat will jump in with recommendations.