Just had my old SystemView display replaced as the screen was no longer readable. I put in the new Vessel View 7 but seem to be getting a persistent error that I cannot clear.
Error reads: FUEL LVL2 CKT HI Port Engine (then there's another error for Stbd)
Fuel tank config is setup correctly in the unit, two tanks of 112.5 gallons each.
While the idea of having too much fuel on board sounds like a nice problem to have I'd just prefer this error goes away!
Anyone done this replacement and/or run into a similar error? My searches on the error code only turn up references to errors on sensors I might not have - that's fine if you could clear it easily but these do not go away.
Thanks!
Error reads: FUEL LVL2 CKT HI Port Engine (then there's another error for Stbd)
Fuel tank config is setup correctly in the unit, two tanks of 112.5 gallons each.
While the idea of having too much fuel on board sounds like a nice problem to have I'd just prefer this error goes away!
Anyone done this replacement and/or run into a similar error? My searches on the error code only turn up references to errors on sensors I might not have - that's fine if you could clear it easily but these do not go away.
Thanks!
Last edited: