Benestee
New Member
One of my salon overhead lights is not working. I assume it is a bulb that needs to be changed. I am not sure how to pull down the light fixture and replace the bulb. I tried to pull it out of the ceiling but it was tough.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
anyone know if they make a clear glass ( not sure if its glass or not) fixture cover instead of the frosted ones? we are switching all our lights to led and would like to replace glass covers with clear if possible
thanks for any input!
I assume it is the same but I am new here so I will write my question. I am a new Sea Ray owner and just purchased an 09 310 Sundancer. Is it correct for this boat, that to remove the 6 inch fixture over the stove to replace the bulb you just pull straight down? I read something about turning the fixture and do not want to break something. Thanks, RF
Flat butter knife. Go slow on pulling it down. It is usually the rivets on each side that gets hung up.I also have a bulb out an haven't been able to get the fixture to release. Does anyone have the secret t getting leverage to pull it down, fingers don't seem to work.