Jambrin
Member
Does anyone know what height the risers are on a 2002 340 DA with raw water cooled 6.2 MPI engines and V drives? I've got an oil leak at the rubber to metal crimp on one of my remote oil filter hoses. It's dripping into the bilge and making a mess. I would like to order the hose and have it for next time I go to the boat, but I don't know the riser height and I didn't know to measure it before I left the boat last time. The options from the Mercury engine catalalog for my SNs are:
32-863806 HOSE Oil, V drive (To Adaptor)(without riser and with six inch riser)
32-863808 HOSE Oil, V drive (To Adaptor)(with three inch riser)
Also, the hose that's leaking is the one that supplies oil from the engine into the remote filter as is indicated by the "in arrow" pointing to the adaptor, so I'm assuming that means I need one of the two hoses above that go "To Adaptor"
Finally, any idea how difficult this hose is to change? It looks like getting to the side of the hose that goes into the engine block will be a bear.
Thanks,
Brian
32-863806 HOSE Oil, V drive (To Adaptor)(without riser and with six inch riser)
32-863808 HOSE Oil, V drive (To Adaptor)(with three inch riser)
Also, the hose that's leaking is the one that supplies oil from the engine into the remote filter as is indicated by the "in arrow" pointing to the adaptor, so I'm assuming that means I need one of the two hoses above that go "To Adaptor"
Finally, any idea how difficult this hose is to change? It looks like getting to the side of the hose that goes into the engine block will be a bear.
Thanks,
Brian