Real Cool Flat TV Install to Replace Old 13" That Came With 2003 Sundancer 300

Discussion in 'Installation Photos/Specs' started by Buzzie8, Oct 18, 2017.

  1. Buzzie8

    Buzzie8 New Member

    23
    Aug 23, 2015
    Oakmont, PA United States
    300 Sundancer 2003
    6.2 L MPI Bravo 3
    Here is a video of an install I did on my 2003 Sea Ray Sundancer. It was a perfect install and it seemed as though it was actually made for my boat. I also put screenshots of the TV and swivels from Amazon!
     
  2. Little Ducky

    Little Ducky Active Member

    934
    Jun 5, 2017
    Chattanooga TN/Dickson TN
    1998 SeaRay 290 Sundancer
    Twin EFI 5.0L w/Alpha 1 drives
    I like that mount.

    I'm going to place that next on my list.
     
  3. JVM225

    JVM225 Well-Known Member

    Apr 8, 2008
    Farmingdale, NY
    2002 410 Sundancer, Monaco Edition.
    3126 Cats.
    Nice, but how do you lock it in place so it doesn’t swing around in rough conditions?
     
  4. Buzzie8

    Buzzie8 New Member

    23
    Aug 23, 2015
    Oakmont, PA United States
    300 Sundancer 2003
    6.2 L MPI Bravo 3
    It is stiff enough that it does not move. Keep in mind, I'm on the river. I'm guessing it would still be OK in rougher seas.
     
  5. Paul Pfeifer

    Paul Pfeifer New Member

    19
    Dec 14, 2017
    2003 Sea Ray 320 Sundancer ; Raymarine SL70C
    Twin 350 Mag
    Would you please provide me with the measurements on the shelf where the arm mounts. EX 5.5" back from the front edge, centered on the shelf. Thank you!
     
  6. Paul Pfeifer

    Paul Pfeifer New Member

    19
    Dec 14, 2017
    2003 Sea Ray 320 Sundancer ; Raymarine SL70C
    Twin 350 Mag
    Got it done. Thank you! I would just add that you need to remove the clamp bracket off the mount and use a bolt for the flush mount.
     

    Attached Files:

  7. bobeast

    bobeast Dance the Tide SILVER Sponsor

    469
    Oct 22, 2017
    Isleton, CA
    2002 310DA
    350 MPI w/V-drives
    Nice. Can you tell me what size tv that is?
     
  8. Paul Pfeifer

    Paul Pfeifer New Member

    19
    Dec 14, 2017
    2003 Sea Ray 320 Sundancer ; Raymarine SL70C
    Twin 350 Mag
    24" Samsung which is 22.1" wide.
     
  9. bobeast

    bobeast Dance the Tide SILVER Sponsor

    469
    Oct 22, 2017
    Isleton, CA
    2002 310DA
    350 MPI w/V-drives
    Thanks!
     
  10. Buzzie8

    Buzzie8 New Member

    23
    Aug 23, 2015
    Oakmont, PA United States
    300 Sundancer 2003
    6.2 L MPI Bravo 3
    Sorry, I did not get your inquiry sooner. I am glad the install went well for you!
     
  11. Steve S

    Steve S Active Member SILVER Sponsor

    697
    Jun 5, 2007
    Northern IL.
    2000 400 Sedan Bridge with twin CAT 3116's

    2000 340 Sundancer - SOLD!
    210 Monaco 1987 - SOLD!
    Twin Caterpillar 3116's 350 HP straight drives
    On my 340 I made a similar install except all I did was buy some black shelf brackets like this and screw them into the existing locking TV slide shelf. Since the shelf pivots I could view the TV from anywhere in the boat. ANd the TV still locked into place. Only thing extra was I had to drill the holes to match the mounting holes on the TV. (long side against the TV).

    upload_2018-4-18_18-32-47.png
     
  12. DjNiki4

    DjNiki4 Member

    84
    Sep 26, 2016
    NJ/NY/CT
    260 Sundancer
    5.7 MAG 350
    Can you send a link for the mount and Antena for the tv
     

Share This Page

Show Sidebar