DowneastSeaRay
Member
- Jan 24, 2021
- 72
- Boat Info
- 1998 450 Sundancer
H&H Marine Lobster Boat
- Engines
- Cat 3126, Honda outboard, Tohatsu outboard
I should title this "RM radar cable "dumb" question", but I can't seem to find a clear answer online. Likely because it's too obvious - but here it goes. I've been having intermittent radar problems and found that the radar cable was damaged during an over-land haul of the boat where. I'm going to replace the whole cable, however, I can't seem to figure out which cable connectors I need on the replacement. I'm assuming that the cables have evolved over the years as things progressed from analog to digital and so on. I'll include pictures of what I have below, but I can't seem to find a match online. Most of the cables I've come across have an extra set of what looks like power (red/black/ground) on one end of the cable. I haven't opened the radar base, maybe the power comes up through the base instead of through the connector on the back?
Any help would be appreciated.
Details:
1998 450 Sundancer
E120
RM HD Digital open array
Any help would be appreciated.
Details:
1998 450 Sundancer
E120
RM HD Digital open array