Raw Seawater Pump for 8.1 Horizon

[Erik R]

Does anyone have a part number and/or recommendation for a raw seawater pump for a 2003 380 Dancer with 8.1's? It has a pressure sensor and it's not plastic. Thanks in advance.

 

[In Two Deep]

I would think if you have the serial number of the engine, you can look it up on one of the parts websites.

 

[Erik R]

I'll have to go to the marina to find the serial number. I know it's not on the top cover where it says "serial number". Do you know where it should be?

 

[Jimmy Buoy]

If you can't rebuild the pump (most machine shops will replace the internals for under $100) due to wear, I'd look at replacing with the stainless model below.

http://www.hardin-marine.com/p-1577...sea-pump-for-mercury-350-496-and-502-mag.aspx

 

[Bt Doctur]

For the 8.1 they all seem to use 862914A13 and the impeller is 862232A2

 

[Erik R]

8M0122652 is the direct replacement with the pressure sensor port. Got one from Offshore Performance Specialties in Fort Myers.