problem:
mtu 1991 183te12v series 2500 hrs.
After turbo exit (1600 RPM) water temp get 100 °C after 5 min. at complete stop, water temp return to 40°C in about 1.5 minutes
maintenance done:
intercoolers, waters pumps, air box, waters intake connection, transmision, filters, termostat, gauges, radiador
Posible solution??
some technical tell me that it a propulsion problem, can be posibily solve with a replacement of rubber bearings and calibration of the propulsion system.
thanks
mtu 1991 183te12v series 2500 hrs.
After turbo exit (1600 RPM) water temp get 100 °C after 5 min. at complete stop, water temp return to 40°C in about 1.5 minutes
maintenance done:
intercoolers, waters pumps, air box, waters intake connection, transmision, filters, termostat, gauges, radiador
Posible solution??
some technical tell me that it a propulsion problem, can be posibily solve with a replacement of rubber bearings and calibration of the propulsion system.
thanks
