Porta Pot

[Matt Drosky]

Hello have a question. I have a 1984 225 cuddy cabin that i need to replace the porta pot in. The problem is every one i look at does not have the top discharge like this. Any ideas where i can find a replacement?
Thanks

 

[Espos4]

Probably because that looks to be custom made. You need a MSD type port-a-pottie. Those are the ones with a 1.5” discharge fitting and the additional vent fitting, I think it’s 5/8”.

That looks like a non MSD type that someone drilled through the cap and made the modifications.

 

[Matt Drosky]

I was wondering why I could find anything. Thanks

 

[techmitch]

I was wondering why I could find anything. Thanks

http://www.valley-marine.com/aquama...product_limit=40&pcat_action=go&p=8&catid=922

 

[Pirate Lady]

here is what you want, walmart normally has it, (i just bought one 2 weeks ago), but out of stock, search around, others will have it. copy this into browser.....
SeaLand 5.0 Gallon SaniPottie 965 MSD Portable Toilet with Mounting Brackets and 1-1/2" MSD Fittings

 

[Lazy Daze]

You might be having a hard time finding an exact replacement because it's 36 years old and that type isn't made anymore! You can try contacting Thetford. Otherwise, no big deal - just adapt the existing hoses to the new MSD portapottie. Easy peasy.

 

[Matt Drosky]

Thanks again guys!

 

[Ron Lime]

I just put this in my Sundancer 268. It's a little overkill but it's really solid. Has top 1.5" MSD Discharge. Also replaced the MSD line to the hull pump-out connector. At 30+ years old it was a little questionable.
https://www.defender.com/product.jsp?id=105225

Have not even used it yet.