Ten Years Gone
New Member
Hi Gang,
I have an assortment of stainless hardware saved from a 1989 Sea Ray 180 Bowrider that I would like to sell as a group, but will certainly sell as individual pieces.
Bow navigation light, Perko transom light socket, Perko deck fuel fill, four 6" long mooring cleats, understow boarding ladder and two 17" grab rails.
I have the complete glove box assembly. Attwood blower. Misc. cup holders.
I very carefully removed the entire hull wiring harness from the helm to the transom and it is complete!
I am also selling separately or together if you would like, the engine electrical components. This includes the alternator , circuit breaker assembly/Mercathode, distributor, coil and engine wiring harness.
Also have a Pertronix Flamethrower coil in 3.0 ohms. Windshield in near new condition. It is all there and ready to be installed. It opened and closed perfectly when still on the boat. No issues whatsoever!
I'm only willing to sell the entire windshield. Due to the fragile nature, I will not consider shipping it. I will be more than happy to deliver for my fuel expense anywhere in central Indiana.
Teleflex steering system. Everything is included from the steering wheel, column, rack, cable and hydraulic rack and pinion. I will sell the PS pump for extra.
The entire outdrive hydraulic trim pump assembly as it sits on its mounting plate. 24 gallon aluminum fuel tank. No leaks, but will need flushed out before being put into service.
The complete original Mercruiser Alpha 1 transom assembly. That means everything that hangs on the boat from inner transom plate to the prop! 1.84:1 ratio. Little bit o' skeg bitten off!
Thanks!
I have an assortment of stainless hardware saved from a 1989 Sea Ray 180 Bowrider that I would like to sell as a group, but will certainly sell as individual pieces.
Bow navigation light, Perko transom light socket, Perko deck fuel fill, four 6" long mooring cleats, understow boarding ladder and two 17" grab rails.
I have the complete glove box assembly. Attwood blower. Misc. cup holders.
I very carefully removed the entire hull wiring harness from the helm to the transom and it is complete!
I am also selling separately or together if you would like, the engine electrical components. This includes the alternator , circuit breaker assembly/Mercathode, distributor, coil and engine wiring harness.
Also have a Pertronix Flamethrower coil in 3.0 ohms. Windshield in near new condition. It is all there and ready to be installed. It opened and closed perfectly when still on the boat. No issues whatsoever!
I'm only willing to sell the entire windshield. Due to the fragile nature, I will not consider shipping it. I will be more than happy to deliver for my fuel expense anywhere in central Indiana.
Teleflex steering system. Everything is included from the steering wheel, column, rack, cable and hydraulic rack and pinion. I will sell the PS pump for extra.
The entire outdrive hydraulic trim pump assembly as it sits on its mounting plate. 24 gallon aluminum fuel tank. No leaks, but will need flushed out before being put into service.
The complete original Mercruiser Alpha 1 transom assembly. That means everything that hangs on the boat from inner transom plate to the prop! 1.84:1 ratio. Little bit o' skeg bitten off!
Thanks!
Last edited:
