Kon Tiki
Member
I am planning on painting my radar arch this spring. The arch is aluminum with a white powder coating. The issue I have is around the courtesy lights and other fittings water has made it's way in.
My plan was to scrape all lose powder coating, use a marine bondo as a filler since the powder coating is fairly think. Then spray.
Anybody out there tackle this project before, any advice or watch outs would be appreciated.
Thanks
My plan was to scrape all lose powder coating, use a marine bondo as a filler since the powder coating is fairly think. Then spray.
Anybody out there tackle this project before, any advice or watch outs would be appreciated.
Thanks