Outdrive paint

[jcoyrochny]

What kind of paint is best to use on the outdrive?

 

[Bridog]

What kind of paint is best to use on the outdrive?

Marina here uses Interlux Trilux 33 prop and drive paint.

 

[tony1b2000]

I use Trilux as well. 1 can for each drive $$$$ Take your time and multiple coats. Important to remember to cover all zincs. Prep the surface as directed.

 

[Bridog]

I use Trilux as well. 1 can for each drive $$$$ Take your time and multiple coats. Important to remember to cover all zincs. Prep the surface as directed.

Just so there's no confusion, "remember to cover all zincs" means NOT with paint
Anti-fouling paint may be applied to boat hull and boat transom, but you must observe the following precautions:

• IMPORTANT: DO NOT paint anodes or MerCathode system reference electrode and anode, as this will render them ineffective as galvanic corrosion inhibitors.
• IMPORTANT: If anti-fouling protection is required for boat hull or boat transom, copper- or tin-based paints can be used if not prohibited by law. When using copper- or tin-based anti-fouling paints, you should avoid any electrical interconnection between the MerCruiser product, anodic blocks, or MerCathode system and the paint. Allow a minimum of 1-1/2 in. (40 mm) UNPAINTED area on the transom of the boat around these items.
• Sterndrive unit and transom assembly should be painted with a good quality marine paint or an anti-fouling paint that DOES NOT contain copper, tin, or any other material that could conduct electrical current. Do not paint drain holes, anodes, MerCathode system, and items specified by the boat manufacturer.