Slimcobra
Member
- Aug 14, 2017
- 102
- Boat Info
- 2000 Sea Ray 210 SunDeck
- Engines
- Mercruiser 5.0 w/ Alpha 1 Gen 2
Everyone here has been great in helping me find answers to my questions and I am going to you all again with another noob question. I had to pull off a riser to replace my steering cable. Now that I am going back together I need to replace the gasket between the manifold and the riser and mine look different than in the diagrams I am finding. The gasket I have has holes on two sides of the gasket but the diagrams are showing the gasket with the long slot on all 4 sides. Could someone have replaced the gaskets in the past and put the wrong ones in? The boat is originally from NH and I'm wondering is the previous owner could have put on more restrictive gaskets due to cooler water temps in the north.
To make matters worse on some of the parts sites that I'm going to do not find my engine when I enter in my serial number. I took a couple of pics of the number and I'm wondering if I am not reading it right. To me it looks like 656968. What do you guys think? As long as I replace both side with the same type of gasket I should be alright, correct?
To make matters worse on some of the parts sites that I'm going to do not find my engine when I enter in my serial number. I took a couple of pics of the number and I'm wondering if I am not reading it right. To me it looks like 656968. What do you guys think? As long as I replace both side with the same type of gasket I should be alright, correct?