xravenx
Member
In the past my port dipstick comes out of the dipstick tube about a half an inch or so after running the boat. This leaves a few drops of oil on the bilge floor between the motors, wipes right up. Yesterday I popped the day hatch and there was a puddle of oil between the motors, the port dispstick was out of the tube about 2". I cleaned eveything up, did not have to add any oil, started the motor and there were no leaks. I ran the boat Sunday for a few hours..........I'm thinking because the dipstick was further out that more then the usual couple of drops of oil came out.........Any thoughts on this.
I'm going down today to put a cable tie on the dipstick and take a little run.........valid excuse to take the boat out , right?
John
I'm going down today to put a cable tie on the dipstick and take a little run.........valid excuse to take the boat out , right?
John