Official 390DA Thread

ttmott said:
If you have a Raymarine nav package then the depth Xdcr is integrated with that. There should be a Raymarine sounder module (DSM300 or DSM30) mounted under the helm. You may also have the Sea Ray Navigator system which has it's own depth transducer which is a standard NMEA 0183 based unit.
I don't know of a sonar / depth transducer integrated with Vessel View at least in the 2006 vessels.
Click to expand...
Ok thanks, I know I have a thru hull transducer I just can’t see where that information is supposed to be displayed, I don’t believe it’s a raymarine transducer but I’ll double check it
 
liv2ryde100 said:
Ok thanks, I know I have a thru hull transducer I just can’t see where that information is supposed to be displayed, I don’t believe it’s a raymarine transducer but I’ll double check it
Click to expand...
It won't be "Raymarine" but the tag on the cable has a Raymarine P/N if original. You'll find it is made by Airmar.
Most integrated transducers are pretty much the same for a given function - the difference is the connector on the end of the wire.
 
ttmott said:
It won't be "Raymarine" but the tag on the cable has a Raymarine P/N if original. You'll find it is made by Airmar.
Most integrated transducers are pretty much the same for a given function - the difference is the connector on the end of the wire.
Click to expand...
So the tag will be under the dash or in the bilge bear transducer?
 
my engine room blower doesnt work. i cant turn it on from the helm or from the panel inside. interestingly enough when i toggle either switch on the light on the switches do not illuminate either. makes me this there is a breaker tripped or fuse broken. so im trying to track down location of the breaker or fuse for that. anyone know where it is located?
 
Check the dc panel in the bilge. The fans are likely bad.
 
20220920_141006~3.jpg
It'll be blower #1 and blower #2 on the bilge main panel. I replaced both last year. You can see one was popped in the pic. For some reason, I can no longer upload my pics. I keep getting file too large pop-up.

Had to crop to 2/3 of original size. Pain...
 
anybody replace the forward master bedroom ac? was gonna upgrade to marinaire 9000btu. any thoughts. mostly worried about it fitting in the space, and also how much water it needs supplied to it.
 
Ours was replaced many years ago. I'd go with 6k BTU unless you're in florida. Not sure of the brands but be aware of the size. I think we went with a dometic replacement so that we could use the same controller but there are many more options available nowadays.
 
gerryb said:
Ours was replaced many years ago. I'd go with 6k BTU unless you're in florida. Not sure of the brands but be aware of the size. I think we went with a dometic replacement so that we could use the same controller but there are many more options available nowadays.
Click to expand...
The one in there now is a 7000, I didn’t really want to undershoot it, but I’m going to check the dimensions and see, I thought I read somewhere on here that someone replaced theirs with marinaire
 
Anyone replace interior bulbs with led? The ceiling lights. Where u order from and part number if u have it thanks!
 
You must log in or register to reply here.

Forum statistics

Threads
113,187
Messages
1,428,212
Members
61,098
Latest member
Klawson83
Back
Top