370Dancer
Well-Known Member
- Oct 2, 2006
- 2,490
- Boat Info
- 1998 370 Sundancer
- Engines
- 380hp MAG MPI Gen VI with V drives
So I took a ride the other day to check on my boat like all good Sea Ray owners do and I noticed something strange on my exterior walk around inspection. On the port side of the boat there are three thru hull fittings grouped together on the side of the boat. There're about in the middle of the boat directly below where the shore power connections are and about 12" above the boot stripe. I think the one in the center is the shower discharge but I don't remember what the other two are. The problem is the one that's furtherest aft was clogged with slush. I tried to dig it out but it goes in pretty deep. It seems as though a small amount of water is coming out of this fitting and freezing up and I need to figure out why. Does anyone know what this is connected to? I was thinking about it on the way home and was wondering if it was connected to the bilge pump in the storage compartment in the floor where the shower sump is. Still can't image where the water could be coming from but I need to get back down there to solve this problem. If anyone knows what this thru hull is for I'd appreciate some help. Thanks, Mark
I'm heading to the boat now, but if memory serves, 1 is the galley sink, one is the sump pump from the shower drain and A/C condensate drains, and the third is for the Head sink.