Norcold Refridgerator

[Moose]

Have 04 260. Want to replace panel on refridgerator from wood grain look (believe OEM) with something else. Maybe stainless or black. Anyone done this or give some advice?

 

[xravenx]

Yep, just did mine last week on my Norcold. Mine may be different then yours but here is what I did. Take the door off as there are two screws on the bottom you need to take out along with two screws on the top. With those screws removed, the verticle latching device can be removed and then you can then slide the existing panel out. I had my sheet metal man cut me a piece of 20 ga. commercial stainless using the old panel as a template, turned out very nice.

John

 

[twomad]

I did the same as the last post but i painted the back side black and put back in place

 

[Moose]

Do you have to take the door off to replace panel insert?

 

[Bugsy24]

Do you have to take the door off to replace panel insert?

Read Post 2!

 

[xravenx]

The door is super easy to remove, the screws holding the latch, not so much.

John