Grousehunter
New Member
Hi,
I have a 2004 280 Sundancer. Neither the port switch panel nor the starboard switch panel have any power. As I was walking up to the boat today at the marina, I noticed the anchor light on top of the radar arch was on which was not on when I went on Thursday to check on the boat. Upon boarding, the back light for the anchor light was not on and I couldn't turn it off. I then figured out that nothing on that switch panel would work (water pump, nav lights, stereo, windless, etc) I then tried the switches on the port switch panel and nothing there either (bilge blower). However the engines do start and the switches for the engines are located on the port switch panel. All the gages, work, the VHF works. In addition to the anchor light that was on, the light in the trunk was on too. I unhooked the shore power and turned the battery switch to off with the hope it would reset, but no luck.
Any help would be greatly appreciated.
Thanks
I have a 2004 280 Sundancer. Neither the port switch panel nor the starboard switch panel have any power. As I was walking up to the boat today at the marina, I noticed the anchor light on top of the radar arch was on which was not on when I went on Thursday to check on the boat. Upon boarding, the back light for the anchor light was not on and I couldn't turn it off. I then figured out that nothing on that switch panel would work (water pump, nav lights, stereo, windless, etc) I then tried the switches on the port switch panel and nothing there either (bilge blower). However the engines do start and the switches for the engines are located on the port switch panel. All the gages, work, the VHF works. In addition to the anchor light that was on, the light in the trunk was on too. I unhooked the shore power and turned the battery switch to off with the hope it would reset, but no luck.
Any help would be greatly appreciated.
Thanks