Flytrade
Active Member
I have had this problem before. I turn on the a/c - heater, but no water is coming out of the boat. What I have done in the past is disconnect the exit hose from the pump, blow through it to dislodge any obstruction, and then it works fine.
A couple days ago everything worked fine. Now I have the same problem, but blowing in the discharge hose is impossible - there is an obstruction.
I checked the water going into the pump, and it flows freely.
Why would this obstruction come and go?
It either works perfectly, or not at all.
I am thinking there is something loose that is bouncing around and clogging the system.
Any ideas you have would be appreciated.
A couple days ago everything worked fine. Now I have the same problem, but blowing in the discharge hose is impossible - there is an obstruction.
I checked the water going into the pump, and it flows freely.
Why would this obstruction come and go?
It either works perfectly, or not at all.
I am thinking there is something loose that is bouncing around and clogging the system.
Any ideas you have would be appreciated.