No 120v on Gen??

[savignr]

I have a 2003 32 DA, when I started the Gen this Weekend to put the Air Conditioner on I didn't have any 120v AC on the Meter. The braker was set to "On" Gen on the Main AC Panel, Shore power was set to Off. Are there any other switches/brakers that I may have missed??
PS I'm on a Mooring so I cannot check Shore power..
Any Thoughts?

Thanks
Ray

 

[sbw1]

You should check the breaker on the genny to see if it tripped. Look again at your electrical panel to make sure that your shore power breakers are "off" and the genny breaker is "on." If all the breakers are properly switched you have a problem with the genny itself.

 

[Presentation]

Is the main breaker on?

After selecting 'gen' I also have to set the main breaker next to the 'gen' vs 'shore' to 'on' else the 120V meter is at 0v.

 

[tawcat]

had the same problem, look in the engine compartment, upper right side of genny, there is a yellow toggle switch, flip that up and you'll have the power you need. made me feel kinda stupid, but it was a learning curve!!!

 

[savignr]

Thanks I have not gotten down to the boat yet to check the switch but I'll post the result when I find the switch.
Thanks again!!

UPDATE!!

"tawcat" was right on!!! There was a switch on the right side of the genny....
Thanks tawcat...