New Technografic cluster

[mnm99]

Technografic had to re-position the gauges to fit. I moved up my Smartcraft and removed the Speedo. I added a Merc Gateway that will work with my Garmin 7610 new GPSMAP 942 that I'm installing where the Smartcraft was. Now I'll be able to have my Filr or Radar on one screen while Nav is on the other. Look at all engine info on both nav units.

 

[Craig]

Looks nice! I did similar this spring. Tecnografic is great.

 

[ocgrant]

Looks great... going there this week myself to see Sam to get my part hydro dipped...

 

[mnm99]

What panel did you have them make? They also did the panel below the gps. View attachment 95262View attachment 95263

Looks nice! I did similar this spring. Tecnografic is great.
View attachment 95261

I was going to go with the new smartcraft too, but I'm installing another Nav unit. Funds prohibited. Question. When you removed your speedo did the smartcraft system alarm or show an error? Did you just take the terminator and terminate the tach?

 

[Craig]

What panel did you have them make? They also did the panel below the gps. View attachment 95262View attachment 95263

I was going to go with the new smartcraft too, but I'm installing another Nav unit. Funds prohibited. Question. When you removed your speedo did the smartcraft system alarm or show an error? Did you just take the terminator and terminate the tach?

I had the center piece made for vv502 and the piece for the Axiom, They also put the woodgrain pattern back on the new black switch pads I replaced. I used a dremel to enlarge the hole a little for the i70 instrument.I had no trouble with a code after removing the speedo. Dind not use a terminator.

 

[mnm99]

Last year I had them make a custom panel from a templet I gave them for below the nav. I think they still have the pattern in there system. It came out nice.

 

[rmlsll]

Went a little different route with mine. I removed speedometer and added a garmin 742xs with merc gateway. A lso did the vinyl wrap on the panels.

 

[mnm99]

Went a little different route with mine. I removed speedometer and added a garmin 742xs with merc gateway. A lso did the vinyl wrap on the panels.View attachment 95299

What Merc gateway is that? Is it a plug and play with the one I have?

 

[rmlsll]

This gateway plugs into j box and nmea 2000

 

[mnm99]

This gateway plugs into j box and nmea 2000

No I have that. I meant the vessel view. What’s the model number ? Mine is a SC5000. I’d like to update mine with the one you have.

 

[rmlsll]

This thing ? Smartcraft Vesselview, Its old, and came with the boat. You need to go to the VV403 or VV703.

 

[mnm99]

View attachment 95337
This thing ? Smartcraft Vesselview, Its old, and came with the boat. You need to go to the VV403 or VV703.

Yes , I have this one. That is a newer one , but not a new as the VV703. I believe the one you posted is a plug and play.