New 420DA Owner-needs parts

Buyajet

Buyajet

Active Member
May 28, 2018
360
Boat Info
2005 420 DA
Engines
Cummins CTA's 480's
So I figured the quickest way to find what I need is to post in this great thread. I just bought my Dancer and the previous owner didn't wish to fix these items and I'm not sure of the best source. The latch on the hard top hatch lever is broken, the A/C vent in cockpit is broken, the large white cockpit A/C vent is broken. Also looking for a stainless steel anchor-any suggestions?

I would really appreciate any help and thanks.
a.jpg
b.jpg
c.jpg
d.jpg
 
welcome-Flounder Pounder-Sea Ray Parts-good places to start
 
Hatch parts directly from Taylor Made. Get yourelf some o-rings whilst your at it too as they can leak and let water in through the latch. You'll need 4 per hatch (2 per latch).
 
juggernaut1 said:
Hatch parts directly from Taylor Made. Get yourelf some o-rings whilst your at it too as they can leak and let water in through the latch. You'll need 4 per hatch (2 per latch).
Click to expand...
Great suggestion and thanks. Still searching for the rest...
 
Welcome to the 420 club - I love mine - finicky at times but she is sex on the water imho! Good luck with the hunt - I am needing the recessed pocket to the right of the helm seat - prev owner over tightened the screws and cracked the frame!!!
chris
 
kysearay said:
Welcome to the 420 club - I love mine - finicky at times but she is sex on the water imho! Good luck with the hunt - I am needing the recessed pocket to the right of the helm seat - prev owner over tightened the screws and cracked the frame!!!
chris
Click to expand...
Ugh-If I see anything like this, I will let you know.
 
I went the Taylor Made route making several phone calls for a broken arm on my 340SDA. When I finally got to the right department I was nicely told that they were made for Sea Ray and they are not allowed to sell direct and to please try the dealer. Needless to say I still have a broken arm.

-Kevin
 
KevinC said:
I went the Taylor Made route making several phone calls for a broken arm on my 340SDA. When I finally got to the right department I was nicely told that they were made for Sea Ray and they are not allowed to sell direct and to please try the dealer. Needless to say I still have a broken arm.

-Kevin
Click to expand...
Yes I got same result. Thanks
 
If you google Taylor Made Hatch, what looks like these parts comes up on several places (iboats.com, go2marine.com, amazon etc) will none of these work, are the SeaRay versions custom? Just trying to help.
 
BillK2632 said:
If you google Taylor Made Hatch, what looks like these parts comes up on several places (iboats.com, go2marine.com, amazon etc) will none of these work, are the SeaRay versions custom? Just trying to help.
Click to expand...
Thank you.
 
I had no such problems ordering hatch parts direct from Taylor Made. Perhaps because I am in Australia? I also didn't ring them, sent an email order with the part numbers and quantities required.
 
importmonkey said:
+1 on this!
Click to expand...

So, I removed it, cleaned all the old caulking, used three new screw locations and recaulked. Took about an hour and cost pretty much nothing (had caulk and screw). It'll do for now and was WAY less than whatever SeaRay wants for a new one. Still have my parts dept trying to locate one.

20180721_140049.jpg
20180721_144030.jpg
 
You must log in or register to reply here.

Forum statistics

Threads
113,177
Messages
1,427,992
Members
61,086
Latest member
MrWebster
Back
Top