molson9
New Member
- Jan 14, 2015
- 33
- Boat Info
- 1988 300 Weekender, 12' dingy 8.8 merc, Garmin 2010c - card.
- Engines
- 2 merc 5.7's
Looking for Helm and Mate seat platforms and aft seat hardware. 88 Sea Ray Weekender.
Need some 300 weekender stuff
- Thread starter molson9
- Start date
What parts are you hunting, maybe I can help some
molson9
New Member
- Jan 14, 2015
- 33
- Boat Info
- 1988 300 Weekender, 12' dingy 8.8 merc, Garmin 2010c - card.
- Engines
- 2 merc 5.7's
Looking for a good ac raw water circulation pump, mostly the seat bases
When you say the seat bases, which seats do you have? Mine are the old lay down style and weigh a ton. I plan or replacing the helm seat very soon and if that's the base you need you can have it!
I just sold sold a pump to my neighbor for his 34' but give me a week to see what I can find for you.
Shoot me a email dwna1a@aol.com, that way I can let you know when I find the pump.
I just sold sold a pump to my neighbor for his 34' but give me a week to see what I can find for you.
Shoot me a email dwna1a@aol.com, that way I can let you know when I find the pump.
molson9
New Member
- Jan 14, 2015
- 33
- Boat Info
- 1988 300 Weekender, 12' dingy 8.8 merc, Garmin 2010c - card.
- Engines
- 2 merc 5.7's
would love it! Not sure where your at but I will come get it when your ready! So what do you plan on replacing it with?
A Captains chair at the helm. I found that once I'm on plan I must be standing to see what's out in front of me.
what size pump do you have for the A/C now?
what size pump do you have for the A/C now?
molson9
New Member
- Jan 14, 2015
- 33
- Boat Info
- 1988 300 Weekender, 12' dingy 8.8 merc, Garmin 2010c - card.
- Engines
- 2 merc 5.7's
using a Northern tool 6 gpm pump. they are cheep and don't last long.
Ok, what you should have is a March250 pump. How big is your AC unit and how much do you use it?
New you can get them online for about $240 or so. I'm going to look and see if there is a used one around the shop on Friday. They are easy to replace. I will get with you over the weekend and let you know.
New you can get them online for about $240 or so. I'm going to look and see if there is a used one around the shop on Friday. They are easy to replace. I will get with you over the weekend and let you know.
molson9
New Member
- Jan 14, 2015
- 33
- Boat Info
- 1988 300 Weekender, 12' dingy 8.8 merc, Garmin 2010c - card.
- Engines
- 2 merc 5.7's
Thanks,
molson9
New Member
- Jan 14, 2015
- 33
- Boat Info
- 1988 300 Weekender, 12' dingy 8.8 merc, Garmin 2010c - card.
- Engines
- 2 merc 5.7's
any luck finding a pump? the one I had was rated at 5gpm, I got a Norther motor driven pump that works but it fails after about 2 weeks of hard use. I get tired of exchanging them cause I got the 3 year service plan. Funny the clerk tried to tell me they were not meant for salt water use. I figure I told them what I wanted it for when I bought it.
Are you over at James River Marina or James City? I like the idea of a covered slip! would mean I could leave some of the canvas of most of the time. Would like to check out your boat some time, as you know mine is an 88 too. So I'm very interested to see what she ought to look like. Mike
Are you over at James River Marina or James City? I like the idea of a covered slip! would mean I could leave some of the canvas of most of the time. Would like to check out your boat some time, as you know mine is an 88 too. So I'm very interested to see what she ought to look like. Mike
