Need part number

[SCORPIO]

I need a set of tab zincs, the ones that fit where the ram attaches to the tab, anybody know it off hand?
I just pulled the boat for the winter and noticed that the 3" rudder zincs I used were almost totally gone (7 months in salt water). I'm going to add the rectangular block zincs to the tabs also for next year. FWIW, several on my dock are reporting excessive zinc depletion this year, so its not just me.
Thanks

 

[Tabman]

Sounds like there is some stray current at the marina!

I think the part number for the Camp zincs you are looking for is BNT-1

Tom
Bennett Marine

 

[SCORPIO]

Thanks for the number Tom. I think I'm going to have to check the potential in the marina next spring and see what is going on. Interestingly enough, my outdrive zincs did not show as much wear as the tabs. The boat has Merchathodes so that may have helped and I also hang a zinc "fish" over the side while at the dock for long durations. I'm going to check my bonding over the winter to see if the tabs are well connected. I'm hoping the extra zinc on the tabs will help give me some added protection.