beernutz
Member
I own a used 2000 EZ Loader bunk trailer (TEZ 17-20/22'
for what its worth) which I bought along with my boat a year ago.
The last time I used my boat I was told one of my rear trailer lights was out. I decided based on looking at the light fixture that wasn't working that I would replace both the left and right light fixtures with Blazer LED lights for additional brightness and durability.
When I went to put them on this morning, none of my trailer lights was working. No tail, no brake, no turn was working on either side. I looked at the 5 wires coming out of the connector and the white one, which according to http://www.ezloader.com/Brochures/OwnManual/Manual.asp?page=12 is the ground wire, is not connected to anything and appears broken. I assume this is the source of my problem but I can't seem to get at the other end of that ground to reattach it. Any suggestions other than just rewiring the trailer from scratch?
The last time I used my boat I was told one of my rear trailer lights was out. I decided based on looking at the light fixture that wasn't working that I would replace both the left and right light fixtures with Blazer LED lights for additional brightness and durability.
When I went to put them on this morning, none of my trailer lights was working. No tail, no brake, no turn was working on either side. I looked at the 5 wires coming out of the connector and the white one, which according to http://www.ezloader.com/Brochures/OwnManual/Manual.asp?page=12 is the ground wire, is not connected to anything and appears broken. I assume this is the source of my problem but I can't seem to get at the other end of that ground to reattach it. Any suggestions other than just rewiring the trailer from scratch?
Last edited: