Need Bilge vent cover 1999 330 Sundancer
- Thread starter tghoerman
- Start date
-
- Tags
- bilge vent cover
- Jun 15, 2015
- 668
- Boat Info
- 1995 500 DA with diesel loving Detroit’s
(SOLD)1992 Sundancer 330
- Engines
- 6v92 Detroit Diesel
eBay? Seem to be many there
dpmulvey
Active Member
- Dec 19, 2007
- 4,188
- Boat Info
- 1999/2007 330 Sundancer Hardtop.
- Engines
- 6.2 Merc Horixons
1.5:1 Velvet Drives
If you are talking about the P/S rear corners.....Good luck. I asked someone (maybe here) if they could be custom made. I was told too many compound angles.
Maybe if you know someone with a 3D printer?
Maybe if you know someone with a 3D printer?
tdschafer
Well-Known Member
My fiberglass guy has the mold (compliments of Larry) from when I crashed the port corner on my boat. He's made both sides for me as well as a couple other members here.
Tony Clark on this forum also had a mold made to construct them out of plastic but he hasn't been active on here in a while. He is located in the UK and had made some for members here in the past as well.
I usually tell people to try him first because my fiberglass guy is around 70 years old & semi-retired so he takes his time making them. He also gel coats them in Arctic white to match (most) Sea Ray's hull color.
Sent from my SM-G930V using Tapatalk
Tony Clark on this forum also had a mold made to construct them out of plastic but he hasn't been active on here in a while. He is located in the UK and had made some for members here in the past as well.
I usually tell people to try him first because my fiberglass guy is around 70 years old & semi-retired so he takes his time making them. He also gel coats them in Arctic white to match (most) Sea Ray's hull color.
Sent from my SM-G930V using Tapatalk
Larry
Well-Known Member
- Oct 19, 2006
- 1,284
- Boat Info
- 2004 42 Sundancer
Hydraulic platform
Cockpit air
KVH M3
- Engines
- 450hp Cummins
tdschafer
Well-Known Member
Guess he didn't need the cover that bad!
Sent from my SM-G930V using Tapatalk
Sent from my SM-G930V using Tapatalk
btye1
New Member
- Dec 24, 2011
- 21
- Boat Info
- 1997 330 Sundancer
- Engines
- 310 hp 454s w/ ZF Hurth Transmissions
Todd,
Can you still contact your fiberglass guy.
I need these things bad, I pulled mine off to buff the boat, and one of them was cracked so bad it split in half and fell in the lake, so I don't have one of them. And the other isn't really salvageable for my fiberglass guy to make a mold.
Right now I just have gaping holes and I don't want to have my 330 looking like that.
Can you still contact your fiberglass guy.
I need these things bad, I pulled mine off to buff the boat, and one of them was cracked so bad it split in half and fell in the lake, so I don't have one of them. And the other isn't really salvageable for my fiberglass guy to make a mold.
Right now I just have gaping holes and I don't want to have my 330 looking like that.
