LIBillsfan
New Member
- May 21, 2010
- 12
- Boat Info
- '97 Chapparal Sig 240
- Engines
- 350 Mercruiser w/Bravo III Drive
IF anyone could shed some light on my situation I would really appreciate it. Im ending a big project of changing my oil pan on my '97 Mercruiser 350 w/Bravo III drive and I am just about done. Those of you who have done this yourself can greatly appreciate what a job this is. Upon turning the key for the first time I found that there was nothing. The starter wouldnt engage at all. At first I wasnt sure if I connected all the wires right but then when I tested all of the wires going to the starter none of them had power. Does anyone have any sugestions as to what may be the cause of this. One wire(Yellow and red) goes to the slave solinode. I have hit the circut breaker button several times. A second pair of wires( an orange going to the altenator, a red going to power I assume), and a third purple and yellow that I believe is going to the electric choke on the carb. for some reason. Any thoughts, please let me know.
:smt100:smt013:smt013:smt013:smt100
:smt100:smt013:smt013:smt013:smt100