jaywoodz
Member
- Nov 12, 2012
- 522
- Boat Info
- 1999 Sea Ray 310 Sundancer
- Engines
- Twin 350 MAG MPI Horizon w/V-Drives
I have a Raymarine E120 Classic. If I turn on the MFD first, then start the starboard engine, it doesn't reset. It remains on, and working. If I start the port motor, it cuts off, or resets. It's random as to whether it resets or just cuts off completely. I need to be able to start my MFD prior to my engines starting for an NMEA 2000 setup reason. I've checked all 3 batteries, and they all tested fine. Voltage is in the green on the tester. One battery read slightly lower than the other 2, but still considered green, or in good working order. Any ideas on why the port engine is triggering this reset or turn off? Very frustrating.