jernberg
New Member
- Nov 5, 2013
- 24
- Boat Info
- 320 Sundancer 2003
- Engines
- Twin 5.0 MPI with Bravo III Drives
Hi
Im having trouble with one of my 5.0 MPI engines from 2003.
At around 3600rpm I get the two beeps per minute error. I have hocked up ScanTool to see that I get an error with the Shift Position Sensor. The error also puts the engine into guardian mode with 89% power.
Have tried this multiple times and the error always occur around 3600 rpm. Switched the sensor with the other engine with the same result... All looks good when I shift gear at idle.
For me it seems like something else is triggering this error, what could it be?
Below also the values from the Scantool session for both engines. Its the BB engine that is giving me trouble.
Thankful for all help I can get as Im stuck...
Best
/Henrik
Im having trouble with one of my 5.0 MPI engines from 2003.
At around 3600rpm I get the two beeps per minute error. I have hocked up ScanTool to see that I get an error with the Shift Position Sensor. The error also puts the engine into guardian mode with 89% power.
Have tried this multiple times and the error always occur around 3600 rpm. Switched the sensor with the other engine with the same result... All looks good when I shift gear at idle.
For me it seems like something else is triggering this error, what could it be?
Below also the values from the Scantool session for both engines. Its the BB engine that is giving me trouble.
Thankful for all help I can get as Im stuck...
Best
/Henrik