Loose cleats 99 340DA

Barlow1016

Member
Jun 3, 2017
45
Farmington Utah
Boat Info
1999 340 Sundancer
Engines
454 merCruiser 7.4 MPI Bravo one outdrive’s 4 blade props. 5.0 Westerbeke generator
.We have always trailered the boat to different lakes. However this year we decided to join the yacht club and slip the boat. All of my cleats are working loose! I have bow lines,spring lines for and aft, stern lines. I even have snubbers on the bow lines and the stern lines.Is this normal? The boats in 1999, and the previous owner did have it slipped,However I know for a fact the cleats were not loose. I’ve owned about three years.
 
That’s pretty unusual. Cleats are installed with a backing supporting them. The factory usually glasses the backing plate in.
My old boat went through Nor’easters and two Hurricanes in the water during the time I owned it and the cleats remained solidly attached to it.
Is it possible that a previous owner improperly installed them, or moved them from an original location. I would remove the loose cleats and inspect the area that they are through bolted to.
 

Forum statistics

Threads
113,172
Messages
1,427,838
Members
61,084
Latest member
AntonioJamm
Back
Top