speakrdude
Well-Known Member
- Feb 21, 2009
- 1,214
- Boat Info
- 2002 Sea Ray 340 DA
Raymarine C80 Tri Data
- Engines
- twin 6.2 MX MPI
My 88 300 weekender didnt have one when I purchased. anyone have on laying around?
looking for table
- Thread starter speakrdude
- Start date
Henry Boyd
Well-Known Member
- Apr 24, 2007
- 6,014
- Boat Info
- ‘09 Sabre 38 Hardtop Express “Serenity”
- Engines
- Volvo D6 w/IPS450 Pods
Jim,
The following are links to tables I have made for a number of different Sea Ray models. Construction technique runs from the moderate to complicated.
http://clubsearay.com/forum/showthread.php?t=22646
http://clubsearay.com/forum/showthread.php?t=19607
If you want to DIY, let me know and I can pass along some dimensions on the the tables I have done.
Henry
The following are links to tables I have made for a number of different Sea Ray models. Construction technique runs from the moderate to complicated.
http://clubsearay.com/forum/showthread.php?t=22646
http://clubsearay.com/forum/showthread.php?t=19607
If you want to DIY, let me know and I can pass along some dimensions on the the tables I have done.
Henry
speakrdude
Well-Known Member
- Feb 21, 2009
- 1,214
- Boat Info
- 2002 Sea Ray 340 DA
Raymarine C80 Tri Data
- Engines
- twin 6.2 MX MPI
Yes that would be great. Do you have specs for the 300?
Henry Boyd
Well-Known Member
- Apr 24, 2007
- 6,014
- Boat Info
- ‘09 Sabre 38 Hardtop Express “Serenity”
- Engines
- Volvo D6 w/IPS450 Pods
Jim,
Being between a 280 and a 320, mu guess is the table top is either a 22" disk, or a 17" x 31" rectangle. Do you know if the table is supposed to be used as part of the cockpit sleeping arrangements? Or is it just a cockpit cocktail table?
Our 280 came with a 22" frisbee. We converted it to a 22" x 32" rectangle that does a good job seating four for a meal when we use the wet bar as a sideboard. The 320 I did started out as 17 x 31 and it became a 32 x 32 square with an edge cut off at an angle to keep the walkway clear.
If you can post some pictures of the existing seating, I'll give it some thought.
Henry
Being between a 280 and a 320, mu guess is the table top is either a 22" disk, or a 17" x 31" rectangle. Do you know if the table is supposed to be used as part of the cockpit sleeping arrangements? Or is it just a cockpit cocktail table?
Our 280 came with a 22" frisbee. We converted it to a 22" x 32" rectangle that does a good job seating four for a meal when we use the wet bar as a sideboard. The 320 I did started out as 17 x 31 and it became a 32 x 32 square with an edge cut off at an angle to keep the walkway clear.
If you can post some pictures of the existing seating, I'll give it some thought.
Henry
speakrdude
Well-Known Member
- Feb 21, 2009
- 1,214
- Boat Info
- 2002 Sea Ray 340 DA
Raymarine C80 Tri Data
- Engines
- twin 6.2 MX MPI
Yes, It supposed to be a bed also. I suppose I could go measure the space and get an "about" dimension.
