Looking for some help from 1998-2000 270DA (wide beam) Sundancer Owners

[Jay Bird]

Would anyone who owns a 1998, 1999 or a 2000 270DA wide beam (9' 2") Sundancer have access to their boat OR the dinette fill-in cushion to be able to give me some measurements.
What I need is the measurement of the dinette fill-in area or the measurements of the dinette fill-in cushion.

Thanks,
Drake

 

[shuizen]

Just so we are clear, the forward dinette or the port side dinette?

Would anyone who owns a 1998, 1999 or a 2000 270DA wide beam (9' 2") Sundancer have access to their boat OR the dinette fill-in cushion to be able to give me some measurements.
What I need is the measurement of the dinette fill-in area or the measurements of the dinette fill-in cushion.

Thanks,
Drake

 

[4sure]

I have a cushion which I made for the dinette. I am going to the boat in the AM and I could take the measurements for you.

 

[sdarc]

Yea which one do you need. I think they are all here at the house. Nope take that back. Port side and cockpit are here.... Admiral use the forward for sleeping.

 

[4sure]

I brought the dinette cushion home. Do you still need the dimensions?

 

[Jay Bird]

Thanks all for the replies, and sorry for the delay in responding... been in Florida on a little vacation, but no boating.

I'm looking for the port side dinette fill-in area.

Thanks,
Drake

 

[4sure]

The thickness of the foam is 5",
Dimensions are 33.25" x 31.75" X 22.75". If you want to make a perfect fit, follow the instructions below.

Set the table in the "bunk" position. Place the foam in position. The angled side will be up against the port wall. You will have to mark the end of the foam for cutting because the wall is slightly slanted. Let the upholster cut the foam for you. Not much has to come off. In addition a small 1" notch will have to be taken out for the molding on the wall, where the table meets the wall on the bottom. Once again let the upholster cut the foam for you. Price of the foam $65, custom fit vinyl cover $60. It fits perfect. Just take your time marking the foam

 

[Jay Bird]

Thank you so much for all your help on this.

Did you have any problems matching the color on the vinyl?

 

[4sure]

I needed the cushion for a trip the last minute, so I asked them to make it white. I am sure it can be very closely matched. Its not a big deal since it is brought out only when sleeping.