Looking for panel trim

[KHutchins77]

Looking for panel trim for 2006 Sea Ray 320 Port Side electrical cover trim. Our mechanic broke the wood grain trim when replacing engine switches. Help! FP Marine sent me here!

 

[Shaps]

try contacting https://www.tecnografic.com/

 

[KHutchins77]

Below is the response that I received from technografic. If you know from whom or a link to order... please reply. I sent a request into searay directly.
Thanks for contacting us Kimberly,

These switch panels are only available direct from SeaRay or one of their dealers and come in raw black plastic. You can send them to us and we can finish the black plastic to match the other burlwood panels. The cost for finishing is $100 for each panel.

If you have any further questions, please don't hesitate to contact me.



Regards,



Sam Sladon



Sales and Design



TECNOGRAFIC, INC.

 

[Fill Ess]

There must be a bunch of these lying around -- from all those who've replaced theirs with the FP pads.

You might search for the EIM replacement threads and ping anyone who says they've replaced their pads.

or if possible, update your thread title to mention the EIM switchpanel / peanut pads / something like that so it gets your attention.

I would give you mine but I'm hopefully a couple years away from total pad failure since most of the switches still work

 

[Shaps]

Below is the response that I received from technografic. If you know from whom or a link to order... please reply. I sent a request into searay directly.
Thanks for contacting us Kimberly,

These switch panels are only available direct from SeaRay or one of their dealers and come in raw black plastic. You can send them to us and we can finish the black plastic to match the other burlwood panels. The cost for finishing is $100 for each panel.

If you have any further questions, please don't hesitate to contact me.



Regards,



Sam Sladon



Sales and Design



TECNOGRAFIC, INC.

I don't. I believe Sam is the man there....
Did you call SeaRay for the replacement?