Looking for a template

[JustJeff017]

Anybody have a template for the rear deck of a 1988 340 EC ? Looking at putting some carpet down and am not real good at those drawing thingers. As always thanks

 

[fasttoys7619]

its easy to make your own template , get a big sheet of Brown construction paper( stuff used to protect floors in new homes) lay it flat on your cockpit floor and use a black marker and run on the paper over the outline from non slip to smooth , very easy

 

[fasttoys7619]

sorry not a black marker , but a black crayon or pencil lead to outline , similar to scribing paper to see what was written previously on a pad

 

[Crave1957]

I just finished replacing my nasty carpet and did it myself. Having never done it before I was a little nervous. Just think it through and test to see how the old carpet will come up. I was able to pull mine out in its original form so the template was there. Then I took the pieces home laid out new carpet and did the cut outs. Transported back to the boat and installed with some velcro and staples zero glue. It all tucks in with a hard straight edged paint scraper. It turn out awesome. It takes some time but is well worth it. My suggestions would be to make sure you have good carpet cutting sissors and good blade knife. Multitool is handy if for remoal on the boat as well. Good luck if I can do this anybody can!
Mike

 

[JustJeff017]

Thank you fellas, I do appreciate the information and your time.