I would like to replace the cockpit, navigation, anchor and transom light bulbs with LED's. Does anyone have the model numbers for these replacements from the Suprebrite web site?
LED Replacement bulbs
- Thread starter Dasch Boat
- Start date
ktcanuck
New Member
- Sep 13, 2010
- 275
- Boat Info
- '96 420 Aft Cabin
2012 310 Merc RIB/2011 9.9Merc2S
- Engines
- 420 3126 Cats.
Can you not find these out by identifying the light OEM and looking them up yourself?
I'm trying to save a step and not have to take the lights apart twice, the anchor light requires disassembling the bimini and setting up a step ladder to get to it. I did a search but couldn't find the info, I'm sure it's been posted before.
ImpulseIII
Active Member
My anchor and top running were were 42mm Festoon Type.
JimG
Well-Known Member
- Nov 4, 2008
- 6,085
- Boat Info
- 2007 310 DA
Kohler 5ECD
- Engines
- Twin 350 Mags
Raw Water Cooled
V-Drives
There appears to be four basic types on most boats: G4, T10 wedge, BA15D, and Festoon. It took all four types and a few varieties of the Festoon and wedge to do all of mine. Its not as simple as me giving you my parts list... the fixture types between 2003 to 2007 models will vary.
I took mine apart, measured and then ordered three different times from two different suppliers to finally get them all right.
I took mine apart, measured and then ordered three different times from two different suppliers to finally get them all right.
The Continuum
New Member
- Jul 14, 2009
- 87
- Boat Info
- 1997 290 Sundancer (SDA)
- Engines
- Twin Mercruiser 5.7L EFI w/ Alpha Ones
JimG, glad I'm not the only one who has found this to be time-consuming! Why they used so many kinds of fixtures throughout the boat baffles me...
- Jun 2, 2008
- 5,024
- Boat Info
- 1998 450 Sundancer, Achilles dinghy w/15hp
- Engines
- 3126 Cat's
It's a boat ! If it was easy everyone would have one..... OMG !!!
ktcanuck
New Member
- Sep 13, 2010
- 275
- Boat Info
- '96 420 Aft Cabin
2012 310 Merc RIB/2011 9.9Merc2S
- Engines
- 420 3126 Cats.
I identified mine by looks and the parts list. Once there you can usually get the bulb type from the OEM web site. I am sure you know that putting a LED bulb in is almost certainly not consistent with the original Coast Guard regs. for the nav light.
Loustoy
New Member
I've been buy my LED bulbs on Ebay from honk kong. I've been happy I bought 31mm Festoon and all work fine also bought 194. Make sure you buy smd buld they are bright.
http://cgi.ebay.com/ebaymotors/2x-1...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories
http://cgi.ebay.com/ebaymotors/2x-1...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories