jasontbrant
New Member
I have a 2004 Sea Ray 280 Sundancer with a 5Kw Kohler Generator. I have been experiencing an issue where the generator will turn on and operate normally for 5 to 10 minute before shutting itself off. I replaced the impeller recently and have fantastic water flow. I verified that the fluid levels are correct. The oil pressure is where it needs to be as well. The only thing that I have found is that the cylinder head and heat exchanger seem to be running at about 230 degrees according to a heat gun. I cannot figure this out and was hoping that someone on this website would be able to help!!