Kohler 5 ECD generator help please

I bled the fuel system and I had lots of pressure but I will throw a new gauge on it just in case

Thx
 
I bled the fuel system and I had lots of pressure but I will throw a new gauge on it just in case

Thx
have you checked the co alarm ?
Some of them where wired into the co alarms
Mine wasn’t but something to look at I guess
 
I don't think mine is tied in to that either
Appreciate the Info

I'm wondering if a bad or corroded ground would do it ?
 
I also noticed number 87 wire on heat exchanger pressure switch is tired into map and throttle body sensor

Not sure if one these components are causing the loc shut down
 
I was having generator issues also... and the suggestion on checking co2 was spot on. Previous owners has yanked it out cause it was always beeping .. once we replaced Co2... generator started working again. Not perfect, but at least not shutting off after 15 seconds
 
Thanks for the update
I have pulled generator out it in my shop.
I have removed adc2100 and making a new set up using a updated controller avr and relays

Will still have safety features and remote start from cabin or from controller now in dash

I don't trust the old set up
Way over engineered for what it is
 

Attachments

  • 20230924_162516.jpg
    20230924_162516.jpg
    4.1 MB · Views: 40
  • 20230924_162513.jpg
    20230924_162513.jpg
    4.4 MB · Views: 41
Ok long story short due to can bus between adc and engine ecm I can not bypass this as thought

I have tested every sensor fuel pressure and replaced injector

I about 99 percent sure my problem is with the adc2100.

Not sure if anyone might have a good used one I could get

I can't justify spending over 2k used on used on something that may not fix it

I will post on classifieds as well

Cheers
Ryan
 

Forum statistics

Threads
113,276
Messages
1,429,883
Members
61,149
Latest member
Mark Knight
Back
Top