LunaSea290
New Member
- Jun 13, 2019
- 28
- Boat Info
- 290 Amberjack 2006
- Engines
- 350 Horizons, V-Drives
Good day all. I have a 2006 Amberjack 290. When I first start the engines I get the most accurate reading on the fuel gauges (also has SmartCraft readings that reflect gauges). During operation the fuel levels will fluctuate on both gauges. Sometimes even going to empty and knowing that I have at least have half full tanks. The readings between the two gauges are different also during operation. I'm leaning towards replacing both sending units, but prior to doing so I was wondering if there is something else I should look at first. I have already cleaned connections and grounds at the tanks and the problem still exists. Thanks for any help and suggestions.
