Taradise
New Member
I know this topic has been beat to death but I wanted opinions of the installation. I am going to purchase these underwater lights by Barnegat:
http://www.overtons.com/modperl/product/details.cgi?r=view&i=24927&fcat=22F&cID=FROOGLE
they have about a 5' wire - inside this wire are 2 smaller wires (1 red & 1 black). once I run the wires into the hull I will need to splice them off - 1 red to the accy switch on the console and 1 black to the negative battery lead? I am assuming the accy switch is already 'hot'. does this installation sound right? If I install them myself...I can save about $300.00
http://www.overtons.com/modperl/product/details.cgi?r=view&i=24927&fcat=22F&cID=FROOGLE
they have about a 5' wire - inside this wire are 2 smaller wires (1 red & 1 black). once I run the wires into the hull I will need to splice them off - 1 red to the accy switch on the console and 1 black to the negative battery lead? I am assuming the accy switch is already 'hot'. does this installation sound right? If I install them myself...I can save about $300.00